Replacing a toilet flange is a relatively simple plumbing task that can save you time and money. If the flange is damaged or leaking, it can cause major problems with your toilet. Replacing it is a quick and easy way to fix the problem and prevent further damage. In this article, we will provide step-by-step instructions on how to replace a toilet flange.
The first step is to turn off the water supply to the toilet. Once the water is turned off, flush the toilet to remove as much water as possible. Next, remove the nuts that hold the toilet to the floor. Once the nuts are removed, carefully lift the toilet off the flange. Be careful not to damage the toilet or the floor.
Once the toilet is removed, you will need to remove the old flange. To do this, use a hacksaw or a utility knife to cut the flange around the base. Once the flange is cut, you can use a pry bar to remove it from the floor. Be careful not to damage the floor or the pipes.
Safety Considerations
Before beginning any work, turn off the water supply to the toilet by closing the water supply valve located behind the toilet. Flush the toilet to remove any remaining water from the tank and bowl. Wear gloves and eye protection to avoid contact with contaminated water or debris.
2. Disconnect the water supply line from the toilet.
Using an adjustable wrench, carefully loosen the nuts holding the water supply line to the toilet’s fill valve. Be careful not to overtighten or damage the nuts. Once the nuts are loose, gently pull the water supply line off the fill valve. Place a towel or bucket under the connection to catch any water that may drip out.
Table: Tools Required
| Tool | Purpose |
|---|---|
| Adjustable wrench | Disconnect water supply line |
| Crescent wrench | Remove old flange |
| New toilet flange | Replace old flange |
| Plumber’s putty | Seal new flange |
| Screwdriver | Adjust floor bolts |
| Toilet wax ring | Create seal between flange and toilet base |
3. Remove the old toilet flange.
Using a crescent wrench, carefully loosen the bolts that secure the old toilet flange to the floor. Once the bolts are loose, use a pry bar to gently pry the old flange off the floor. Clean the floor around the flange area to remove any debris or old wax ring.
How To Replace Flange On Toilet
Replacing a toilet flange is a simple plumbing task that can be completed in a few hours. The flange is the metal ring that connects the toilet to the drainpipe. Over time, the flange can become corroded or damaged, leading to leaks. If you notice water leaking around the base of your toilet, it is likely that the flange needs to be replaced.
Steps to Replace a Toilet Flange
- Turn off the water supply to the toilet. This is usually done by turning the valve behind the toilet clockwise.
- Flush the toilet to remove all the water from the bowl.
- Disconnect the water supply line from the toilet. This is usually done by loosening the nuts that connect the line to the toilet’s fill valve.
- Remove the nuts that hold the toilet to the floor. These nuts are usually located at the base of the toilet.
- Lift the toilet straight up and off of the flange. Be careful not to damage the toilet or the floor.
- Clean the old flange. Remove any old wax or sealant from the flange.
- Apply a new wax ring to the new flange. The wax ring should be centered on the flange.
- Place the new flange over the drainpipe. Make sure that the flange is level.
- Tighten the bolts that hold the flange to the floor. These bolts should be tightened until the flange is secure.
- Reconnect the water supply line to the toilet.
- Turn on the water supply to the toilet.
- Flush the toilet to check for leaks.
People Also Ask
How do I know if my toilet flange needs to be replaced?
There are a few signs that indicate that your toilet flange may need to be replaced. These signs include:
- Water leaking around the base of the toilet
- A loose or wobbly toilet
- A cracked or damaged flange
Can I replace a toilet flange myself?
Yes, replacing a toilet flange is a relatively simple plumbing task that can be completed by most homeowners. However, it is important to follow the steps carefully to avoid any damage to the toilet or the floor.
How much does it cost to replace a toilet flange?
The cost of replacing a toilet flange will vary depending on the type of flange used and the labor costs in your area. However, the average cost of replacing a toilet flange is between $50 and $150.
