Replacing the speedometer light bulb in a 2013 Honda Accord is a relatively straightforward task that can be completed in under an hour. By following the steps outlined below, you can save yourself the time and expense of taking your car to a mechanic. Before you begin, ensure you have the following tools and materials: a Phillips head screwdriver, a new speedometer light bulb, and a pair of needle-nose pliers.
To start, locate the instrument cluster panel, which is the panel that houses the speedometer, tachometer, and other gauges. Once you have located the instrument cluster panel, remove the screws that hold it in place using the Phillips head screwdriver. Carefully pull the instrument cluster panel towards you, being careful not to damage the wires or connectors attached to it. Once the instrument cluster panel is removed, you will see the back of the speedometer. Locate the speedometer light bulb, which is typically a small, round bulb with a single contact point. Use the needle-nose pliers to gently pull the old light bulb straight out of its socket. Be careful not to touch the glass of the new light bulb, as the oils from your skin can cause it to burn out prematurely.
Insert the new light bulb into the socket, ensuring that the contact point is aligned correctly. Gently push the light bulb into place until it clicks. Reattach the instrument cluster panel to the dashboard, ensuring that all screws are tightened securely. Turn on the headlights to test the new light bulb. If the bulb is working correctly, you have successfully replaced the speedometer light bulb in your 2013 Honda Accord.
Removing the Instrument Cluster Panel
1. **Locate the screws holding the instrument cluster panel in place.** There are two screws located at the top of the panel and two screws located at the bottom.
2. **Remove the screws.** Once the screws are removed, carefully pry the panel off of the dashboard. It may be necessary to use a thin, flat-head screwdriver to gently pry the panel off.
3. **Disconnect the electrical connectors on the back of the panel.** There are two electrical connectors on the back of the panel. One connector is for the speedometer and the other connector is for the odometer. Disconnect both connectors by pressing on the release tab and pulling the connector straight off of the panel.
4. **Remove the instrument cluster panel from the dashboard.** Once the electrical connectors are disconnected, the instrument cluster panel can be removed from the dashboard.
5. **Lay the instrument cluster panel face down on a clean, soft surface.** This will prevent the panel from getting scratched or damaged.
6. **Locate the bulb that needs to be replaced.** The bulb is located behind the speedometer. It is a small, white bulb with a black base.
7. **Gently pry the bulb out of its socket.** Use a small, flat-head screwdriver to gently pry the bulb out of its socket.
8. **Insert the new bulb into the socket.** Make sure that the bulb is seated properly in the socket.
9. **Reattach the electrical connectors to the back of the instrument cluster panel.** Plug the connectors back into the panel and make sure that they are secure.
10. **Reinstall the instrument cluster panel into the dashboard.** Carefully slide the panel back into place and secure it with the four screws.
11. **Test the speedometer light.** Turn on the headlights and make sure that the speedometer light is working properly.
Removing the Burned-Out Bulb
1. Locate the instrument cluster. It is the panel directly in front of the steering wheel that contains the speedometer, tachometer, and other gauges.
2. Carefully remove the instrument cluster from the dashboard. Consult your vehicle’s owner’s manual for specific instructions on how to do this, as the process may vary depending on the model.
3. Disconnect the electrical connectors from the back of the instrument cluster.
4. Remove the screws or clips that hold the instrument cluster casing together. Carefully separate the casing halves to expose the internal components.
Accessing the Speedometer Bulb
- Locate the speedometer bulb holder. It is typically a small, plastic socket that holds the bulb in place.
- Use a needle-nose pliers or a flat-head screwdriver to gently squeeze the sides of the bulb holder and pull it out of the socket.
- Remove the burned-out bulb from the holder.
5. Replace the burned-out bulb with a new one of the same type. Be sure to insert it correctly into the socket, aligning the pins on the bulb with the corresponding holes in the socket.
| Replacement Bulb Specifications |
|---|
| Bulb Type: T5 wedge |
| Wattage: 1.2 watts |
| Color: Green |
6. Reassemble the instrument cluster casing and secure it with the screws or clips.
7. Reconnect the electrical connectors to the back of the instrument cluster.
8. Reinstall the instrument cluster into the dashboard.
9. Test the new bulb by turning on the headlights and checking if the speedometer is illuminated.
How To Change 2013 Honda Accord Speedometer Light Bulb
Replacing the speedometer light bulb in a 2013 Honda Accord is a relatively simple task that can be completed in a few minutes. Here are the steps involved:
- Gather the necessary tools. You will need a Phillips head screwdriver and a new speedometer light bulb.
- Locate the speedometer light bulb. The speedometer light bulb is located behind the instrument cluster. To access the instrument cluster, you will need to remove the steering wheel shroud.
- Remove the steering wheel shroud. The steering wheel shroud is held in place by a few screws. Once the screws are removed, you can pull the shroud off.
- Remove the instrument cluster. The instrument cluster is held in place by a few screws. Once the screws are removed, you can pull the instrument cluster out.
- Replace the speedometer light bulb. The speedometer light bulb is located on the back of the instrument cluster. To replace the bulb, simply twist the old bulb out and insert the new bulb.
- Reinstall the instrument cluster. Once the new bulb is installed, you can reinstall the instrument cluster. To do this, simply slide the instrument cluster back into place and tighten the screws.
- Reinstall the steering wheel shroud. Once the instrument cluster is reinstalled, you can reinstall the steering wheel shroud. To do this, simply snap the shroud back into place.
People Also Ask About
How Do You Change 2013 Honda Accord Speedometer Light Bulb?
To change the speedometer light bulb in a 2013 Honda Accord, you will need to remove the steering wheel shroud and the instrument cluster. Once the instrument cluster is removed, you can replace the speedometer light bulb by twisting the old bulb out and inserting the new bulb.
How Much Does It Cost to Replace Speedometer Light Bulb 2013 Honda Accord?
The cost to replace the speedometer light bulb in a 2013 Honda Accord will vary depending on the make and model of your car, as well as the labor rates in your area. However, you can expect to pay between $20 and $50 for the replacement.
Where Is Speedometer Light Bulb Located 2013 Honda Accord?
The speedometer light bulb in a 2013 Honda Accord is located behind the instrument cluster. To access the instrument cluster, you will need to remove the steering wheel shroud.
How To Change 2013 Honda Accord Speedometer Light Bulb?
To change the speedometer light bulb in a 2013 Honda Accord, you will need to remove the steering wheel shroud and the instrument cluster. Once the instrument cluster is removed, you can replace the speedometer light bulb by twisting the old bulb out and inserting the new bulb.
