5 Ways to Improve FPS in First Descendant

Are you tired of your game stuttering and lagging? Do you wish you could enjoy smooth, high-quality gameplay without any interruptions? If so, then you need to learn how to gain more frames in First Descendant. In this article, we will provide you with some tips and tricks that will help you boost your frame rate and improve your gaming experience.

One of the most important things you can do to gain more frames is to update your graphics drivers. Outdated drivers can cause a variety of problems, including reduced frame rates. To update your drivers, simply visit the website of your graphics card manufacturer and download the latest drivers for your card. Once you have downloaded the new drivers, install them and restart your computer. You should see a noticeable improvement in your frame rate after updating your drivers.

Another way to gain more frames is to lower your graphics settings. The higher your graphics settings, the more strain you put on your GPU. This can lead to reduced frame rates, especially on older or less powerful GPUs. To lower your graphics settings, simply open the game’s settings menu and adjust the graphics settings to the lowest possible settings. You may need to experiment with different settings to find the optimal balance between graphics quality and frame rate.

Optimizing Graphics Settings

1. Lowering Resolution

If you’re experiencing significant frame drops, especially on older hardware or high-demanding settings, reducing the resolution of the game can significantly improve performance. Lower resolutions require the GPU to render fewer pixels, freeing up resources for other tasks.

Resolution	Pixels
720p	1280 x 720
1080p	1920 x 1080
1440p	2560 x 1440
4K	3840 x 2160

It’s recommended to start by lowering the resolution to 720p or 1080p and gradually increase it until you find a balance between acceptable visual quality and optimal performance.

2. Adjusting Other Graphics Options

In addition to resolution, there are several other graphics settings that can be tweaked to improve performance. Look for options such as:

Texture Quality: Reducing texture resolution can significantly reduce VRAM usage.
Shadow Quality: Shadows can be computationally expensive. Lowering shadow quality or disabling them can improve frames.
Anti-Aliasing: Anti-aliasing can smooth out jagged edges but can also be demanding on GPUs. Try reducing or disabling it.

3. Advanced Graphics Tweaks

For experienced users, there are additional graphics settings that can be accessed through the game’s config files or command lines. These options often provide granular control over specific rendering aspects, but they may require technical knowledge and can potentially destabilize the game.

Utilizing Performance Enhancements

Disable VSync

VSync synchronizes your frame rate with the refresh rate of your monitor, ensuring smooth gameplay without screen tearing. However, it can cap your frame rate below its potential, especially on high-refresh-rate monitors. Consider disabling VSync to unlock your frame rate and take advantage of your monitor’s full capabilities.

Reduce Graphics Quality

Adjusting graphics settings can significantly impact performance. Consider lowering or disabling certain graphical options, such as texture quality, anti-aliasing, and shadow detail. Each option’s impact on performance can vary, so experiment with different settings to find the optimal balance between visual fidelity and frame rate.

Optimize Display Settings

Your monitor’s refresh rate and resolution can affect frame rates. A higher refresh rate allows for smoother gameplay, but it can also be more demanding on your graphics card. Similarly, a higher resolution can provide sharper images but at the cost of performance. Consider adjusting your monitor settings to match your hardware capabilities.

Enable Game Mode

Some monitors and graphics cards offer a “Game Mode” that optimizes settings for improved performance. This mode typically disables certain graphical features and reduces latency, resulting in a smoother and more responsive gaming experience. Enable Game Mode if available on your system.

Update Drivers

Graphics drivers play a crucial role in optimizing performance. Ensure that you have the latest drivers installed for your graphics card. Driver updates often include performance improvements and bug fixes that can significantly enhance your gaming experience.

Disabling Unnecessary Background Processes

Unnecessary background processes can consume your computer’s resources, slowing down your game and causing lag. Follow these steps to disable unnecessary background processes:

1. Open the Task Manager

Press the “Ctrl+Shift+Esc” keys simultaneously to open the Task Manager.

2. Go to the “Processes” Tab

Click on the “Processes” tab at the top of the Task Manager window.

3. Identify and Disable Unnecessary Processes

Carefully review the list of processes running on your computer. Look for processes that are not essential for running your system or playing the game. Right-click on these processes and select “End Task” to disable them. You can also sort the processes by CPU or Memory usage to identify the most resource-intensive processes.

Note: Be cautious when disabling processes. Only disable processes that you are sure are not necessary for the proper functioning of your system or the game. If you are unsure about a particular process, do not disable it.

Process Name	Description
Windows Update	Updates the Windows operating system. Can be safely disabled if you do not want to install updates immediately.
Cortana	Microsoft’s personal assistant. Can be safely disabled if you do not use it.
NVIDIA Control Panel	Controls the NVIDIA graphics card settings. Only disable if you are experiencing problems with the graphics card.

Overclocking Your GPU

Overclocking the GPU involves pushing it past its factory settings to achieve higher performance. This can result in a significant increase in frames per second (FPS), but it also may increase the GPU’s temperature and power consumption. Here’s how to overclock your GPU:

1. Download and install a GPU overclocking tool.

There are several reputable GPU overclocking tools available, such as MSI Afterburner, EVGA Precision X1, and Zotac FireStorm. These tools allow you to adjust the GPU clock speed, memory speed, power limit, and fan speed.

2. Gradually increase the GPU clock speed.

Start by increasing the GPU clock speed by a small amount, such as 25MHz. Run a benchmark or game to test for stability. If the system remains stable, continue to increase the clock speed in small increments until you reach instability. Instability may manifest as graphical artifacts, crashes, or system freezes.

3. Monitor the GPU temperature.

As you increase the GPU clock speed, the temperature will also increase. It’s important to monitor the temperature to prevent damage to the GPU. Most GPU overclocking tools have built-in temperature monitoring capabilities. Aim to keep the GPU temperature below 85°C (185°F).

4. Fine-tune the power limit and fan speed.

Once you have achieved a stable clock speed, you can fine-tune the power limit and fan speed to further improve performance or reduce noise. Increasing the power limit will allow the GPU to draw more power, which can result in higher performance. Increasing the fan speed will help to dissipate heat, which can keep the GPU cooler and allow for higher clock speeds.

GPU overclocking tool	Pros	Cons
MSI Afterburner	User-friendly interface Advanced features	Limited compatibility with some GPUs
EVGA Precision X1	Extensive compatibility One-click overclocking presets	Can be resource-intensive
Zotac FireStorm	Intuitive design Real-time monitoring	Fewer features compared to other tools

Reducing Input Lag

1. Update Your Drivers

Outdated drivers can introduce input lag by causing delays in communication between your hardware and the game. Regularly update your graphics card and other hardware drivers to ensure optimal performance.

2. Disable VSync

Vertical sync (VSync) synchronizes your game’s frame rate with your monitor’s refresh rate to prevent screen tearing. However, this can also introduce input lag. If you’re experiencing high input lag, try disabling VSync in your game’s settings.

3. Enable Game Mode in Windows

Windows 10 and 11 have a Game Mode feature that optimizes your system for gaming by prioritizing game processes and reducing background tasks. Enable Game Mode in the Windows Settings to minimize input lag.

4. Use a Wired Connection

Wireless connections can have higher latency than wired connections, which can lead to input lag. If possible, connect your gaming device to your network using an Ethernet cable.

5. Check Your Monitor’s Settings

Response Time and Refresh Rate

Setting	Impact on Input Lag
Response time	Lower response times reduce the amount of time it takes for your monitor to display a new image, reducing input lag. Aim for a response time of 1ms or less for the best results.
Refresh rate	Higher refresh rates allow your monitor to display more frames per second, reducing the perceived input lag. Aim for a refresh rate of 144Hz or higher for smoother gameplay.

Input Lag Compensation

Some monitors have built-in input lag compensation (ILC) features that actively reduce input lag by predicting the amount of delay and adjusting the display timing accordingly. Enable ILC in your monitor’s settings if available.

Updating Hardware Drivers

Maintaining up-to-date hardware drivers is essential for achieving optimal performance in First Descendant. These drivers provide critical instructions that enable your devices to communicate effectively with your system.

To update your hardware drivers:

Press the Windows key and search for Device Manager.
Locate the device you want to update, such as your graphics card or network adapter.
Right-click on the device and select Update Driver.
Choose the option to Search automatically for updated driver software.
Wait for the update process to complete.
Restart your system to apply the changes.

Manually Updating Drivers

If the automatic update process fails, you may need to manually download and install the latest drivers from the manufacturer’s website:

Identify the hardware model and manufacturer.
Visit the manufacturer’s website and locate the support section.
Search for the latest driver for your specific model.
Download and install the driver according to the manufacturer’s instructions.

Benefits of Updating Drivers

Benefit	Description
Improved Performance	Latest drivers fix known issues and optimize hardware performance.
Increased Stability	Updated drivers help prevent crashes and system errors.
Enhanced Features	New drivers may unlock additional functionality for your hardware.

Cleaning Your Computer

Regularly cleaning your computer can improve its performance and free up space, potentially improving frame rates in games. Follow these steps for a thorough cleaning:

1. Uninstall Unnecessary Programs

Remove any programs you don’t use to free up space and reduce background processes.

2. Scan for Malware

Run a malware scan to eliminate harmful software that could be slowing down your computer.

3. Clean the Registry

Use a registry cleaner to remove outdated and invalid registry entries that can interfere with performance.

4. Disk Cleanup

Run the Disk Cleanup utility to remove temporary files, logs, and other unnecessary data.

5. Optimize Storage

Use a storage optimizer to defragment your hard drive, improving read and write speeds.

6. Update Drivers

Ensure that all your hardware drivers are up to date for optimal performance.

7. Advanced Cleaning

a. Clean the Fans and Heatsink

Dust accumulation on fans and heatsinks can lead to overheating, resulting in lower frame rates. Use a compressed air can to remove dust and ensure proper airflow.

b. Replace Thermal Paste

Thermal paste between the CPU and heatsink can degrade over time, reducing cooling efficiency. Replace it with fresh thermal paste to improve heat transfer.

c. Defragment the Page File

The page file is used as virtual memory when RAM is insufficient. Defragmenting it can improve performance by reducing access times.

Using a Game Booster

A game booster is a software application designed to improve the performance of video games by optimizing system resources and reducing background processes that may consume valuable RAM and CPU cycles. By utilizing a game booster, you can potentially unlock additional frames per second (FPS) in First Descendant, enhancing your gaming experience with smoother gameplay and faster response times.

How a Game Booster Works

Feature	Effect on Performance
Memory optimization	Frees up RAM by terminating unnecessary background applications, allowing for smoother and more stable gameplay
Process prioritization	Prioritizes the First Descendant game process, allocating more system resources to it for optimal performance
Background process reduction	Suspends or terminates non-essential background processes to minimize resource consumption and eliminate potential performance bottlenecks
Network optimization	Adjusts network settings to reduce latency and improve online gaming experience
Game-specific tweaks	Implements game-specific optimizations based on known performance issues, resulting in tailored enhancements for First Descendant

Adjusting Windows Settings

Windows 10 and 11 offer various settings that can affect your gaming performance. Here’s how to optimize them for First Descendant:

1. Disable Game Mode

While Game Mode aims to enhance gaming performance, it can sometimes interfere with other processes. Disabling it may improve stability.

2. Enable High-Performance Mode

In the Power Options, switch to “High-performance” mode to prioritize CPU and GPU resources for gaming.

3. Disable Background Apps

Close unnecessary apps running in the background, as they can consume system resources and affect performance.

4. Set High Priority for First Descendant

In the Task Manager, right-click on “First Descendant” and set its priority to “High” to allocate more resources to the game.

5. Update Windows and Drivers

Ensure that Windows and your graphics drivers are up to date for optimal performance and stability.

6. Optimize Virtual Memory

In the Advanced System Settings, adjust the virtual memory settings to ensure sufficient RAM allocation.

7. Adjust Graphics Card Settings

Use your graphics card’s control panel to tweak settings like anti-aliasing, texture filtering, and resolution for improved performance.

8. Enable Game Bar

Windows 10/11’s Game Bar can provide performance metrics and allow you to quickly optimize settings.

9. Advanced Settings

For advanced users, here are additional settings to consider:

Setting	Purpose
Disable Fullscreen Optimizations	Reduce input lag in fullscreen mode
Enable Hardware-Accelerated GPU Scheduling	Offload GPU scheduling to hardware
Disable Windows Defender Real-time Protection	Temporarily disable antivirus protection to minimize system overhead

Playing in Windowed Mode

Playing in windowed mode can often improve performance in First Descendant. To enable windowed mode, follow the steps below:

Launch First Descendant.
In-game, press the Esc key to open the game menu.
Click on the “Settings” tab.
In the “Display” section, set “Display Mode” to “Windowed” or “Borderless Windowed.”
Click “Apply” to save your changes.

You can further optimize performance in windowed mode by adjusting the resolution. A lower resolution will generally result in better performance.

Here is a table summarizing the benefits and drawbacks of playing in windowed mode:

Benefit	Drawback
Improved performance	Lower resolution (optional)
Easier multitasking	May introduce input lag

First Descendant How To Gain More Frames

First Descendant is a fast-paced, action-packed game that requires quick reflexes and a steady hand. If you’re finding that your frames are dropping and you’re struggling to keep up with the action, there are a few things you can do to improve your performance.

Update your drivers. Outdated drivers can cause all sorts of problems, including frame drops. Make sure you have the latest drivers for your graphics card and motherboard.
Close unnecessary programs. Any programs that are running in the background can eat up resources and slow down your game. Close any programs that you don’t need to be running while you’re playing First Descendant.
Lower your graphics settings. If you’re still having trouble getting good frames, you may need to lower your graphics settings. This will make the game look less visually impressive, but it will also improve your performance.
Overclock your hardware. Overclocking your hardware can give you a significant performance boost. However, it’s important to note that overclocking can also damage your hardware if you’re not careful. Only overclock your hardware if you know what you’re doing.