When you’re driving, it’s important to be aware of your surroundings. That’s why many cars are now equipped with backup cameras. These cameras give you a clear view of what’s behind your car, making it easier to back up safely. However, if your backup camera isn’t working, it can be a major safety hazard. In this article, we’ll show you how to power on your backup camera on a Stinger radio.
First, make sure that your Stinger radio is turned on. Then, press the “Menu” button on the radio. A menu will appear on the screen. Use the up and down arrows to navigate the menu until you find the “Settings” option. Press the “Enter” button to select the “Settings” option. Another menu will appear on the screen. Use the up and down arrows to navigate the menu until you find the “Camera” option. Press the “Enter” button to select the “Camera” option. A submenu will appear on the screen. Use the up and down arrows to navigate the submenu until you find the “Power” option. Press the “Enter” button to select the “Power” option. The backup camera will now be powered on.
If you’re still having trouble powering on your backup camera, there may be a problem with the camera itself. In this case, you’ll need to take your car to a mechanic to have the camera repaired or replaced. However, in most cases, you should be able to power on your backup camera by following the steps outlined above.
How To Power Backup Camera On Stinger Radio
To power the backup camera on a Stinger Radio, you will need to connect the camera’s power wire to a 12-volt power source. The best place to do this is to the reverse light wire, which is usually located in the trunk or behind the taillights. Once the power wire is connected, you will need to connect the camera’s video cable to the radio’s video input. Once the video cable is connected, you will need to turn on the radio and select the camera input. The camera should now be powered on and you should be able to see the image from the camera on the radio’s screen.
