4 Easy Steps To Reset Hjt Ip Camera To Factory Settings

If you’re having trouble with your HJT IP camera, resetting it to factory settings can be a quick and easy way to get it working properly again. Here’s how to do it:

First, locate the reset button on your camera. It’s usually a small, recessed button located on the back or bottom of the camera. Once you’ve found the reset button, press and hold it for about 10 seconds. The camera will then reboot and the factory settings will be restored.

After the camera has rebooted, you’ll need to reconfigure it. This includes setting the camera’s IP address, subnet mask, and gateway address. You’ll also need to create a new user account and password. Once you’ve configured the camera, you should be able to use it normally.

Resetting Using the Direct Method

This method requires physical access to the IP camera. Follow these steps:

Locate the Reset Button: Most IP cameras have a small reset button located on the bottom or back of the device. It may be recessed, so you may need a paperclip or thin object to press it.
Press and Hold the Reset Button: Press and hold the reset button for approximately 10 seconds. The camera will typically beep or flash an LED to indicate that the reset process has started.
Release the Reset Button: Once the reset process has started, release the reset button. The camera will reboot and return to its factory default settings.

Note: The specific steps may vary slightly depending on the model of IP camera. Refer to the user manual for detailed instructions.

Camera Manufacturer	Reset Button Location
Axis	Bottom of the camera, behind the lens
Hikvision	Back of the camera, near the power connector
Dahua	Bottom of the camera, concealed by a rubber plug

Resetting Through Web Interface

Access the camera’s web interface by entering its IP address into a web browser. The default IP address for Hjt cameras is usually 192.168.1.10.

Once logged in, navigate to the “System” or “Configuration” tab.

Locate the “Factory Reset” or “Reset to Default” button. This may be located under the “Settings” or “Maintenance” section.

Confirm the reset by clicking “OK” or “Confirm.”

Wait for the camera to reboot, which may take a few minutes. Once the reset is complete, the camera will have its default settings.

Additional Details for Resetting Through Web Interface

Here are some additional details to consider when resetting your Hjt IP camera through the web interface:

Reset button location:	Typically found under the “System” or “Configuration” tab, and within the “Settings” or “Maintenance” section.
Confirmation required:	Most cameras will prompt you to confirm the reset before proceeding. Click “OK” or “Confirm” to continue.
Reboot time:	The camera will take a few minutes to reboot after the reset is initiated. Wait for the process to complete before attempting to access the camera again.

Note that resetting the camera to factory settings will erase all custom settings, including network configurations, user accounts, and motion detection parameters. It is recommended to make a backup of your current settings before performing a reset.

Identifying Default IP Address

Determining the default IP address of your HJT IP camera is crucial for accessing its settings and resetting it to factory defaults. Here are the steps to identify your camera’s IP address:

Check the Device Label: Many HJT cameras have a label on their bottom or back that lists the default IP address.
Use a Router’s DHCP Table: Log into your router’s web interface and navigate to the DHCP table. The table will display all the devices connected to your network, including your camera, and its assigned IP address.
Scan for Devices: Use a network scanning tool, such as Advanced IP Scanner, to scan your local network for connected devices. The tool will provide you with a list of all detected devices, including your camera’s IP address.
Use a Default IP List: Refer to a list of default IP addresses for HJT cameras. Common default IP addresses include 192.168.1.100, 192.168.0.100, and 192.168.1.80.
Contact Support: If you cannot find the IP address of your HJT camera using the above methods, contact the manufacturer’s support team for assistance.

Method	How to
Check Device Label	Inspect the label on the camera’s body for the default IP address.
Router’s DHCP Table	Log into your router’s web interface and find the DHCP table with connected devices and their IP addresses.
Network Scanning Tool	Use a network scanner like Advanced IP Scanner to detect your camera and its IP address.
Default IP List	Refer to a list of common default IP addresses for HJT cameras.
Contact Support	Reach out to the HJT support team for assistance if other methods fail.

Resetting with ONVIF

The ONVIF (Open Network Video Interface Forum) protocol provides standardized interfaces for IP cameras. It allows for the discovery, configuration, and monitoring of IP cameras on a network. To reset an HJT IP camera to factory settings using ONVIF, follow these steps:

1. Download and install an ONVIF client

There are several ONVIF clients available, such as ONVIF Device Manager and Milestone Device Manager. Choose one and install it on your computer.

2. Discover the IP camera on the network

Open the ONVIF client and discover the IP camera on the network. The IP camera’s IP address will be displayed in the list of devices.

3. Connect to the IP camera

Select the IP camera from the list and enter the username and password for the camera. This information can be found in the camera’s documentation.

4. Navigate to the System menu

Once connected to the IP camera, navigate to the System menu in the ONVIF client. This menu may be located under different sections depending on the client you are using.

5. Find the Factory Reset option

In the System menu, locate the Factory Reset option. This option may be found under a subsection called “Maintenance” or “Configuration.”

6. Confirm the reset

Click on the Factory Reset button and confirm that you want to reset the camera to factory settings. The camera will now begin the reset process, which may take several minutes. Once the reset is complete, the camera will reboot and be restored to its factory default settings.

Parameter	Default Value
IP Address	192.168.1.108
Username	admin
Password	password

Troubleshooting Reset Issues

If encountering issues while resetting the HJT IP camera to factory settings, refer to the following troubleshooting tips:

8. Verify Power and Network Connectivity

Ensure that the camera is plugged in and powered on. Then, verify that the Ethernet cable is securely connected between the camera and your router or network switch. If the camera supports Wi-Fi, make sure it is connected to the correct Wi-Fi network and that you have entered the correct password.

If connectivity issues persist, check the following:

– Reset your router or network switch.
– Use a different Ethernet cable to connect the camera.
– If using Wi-Fi, move the camera closer to the router or access point.
– Check the camera’s network settings in its web interface to ensure they are correct.

Issue	Solution
Camera is not powered on	Ensure the power adapter is properly connected and the camera is switched on.
Ethernet cable is not connected	Verify the Ethernet cable is firmly plugged into the camera and your network device.
Incorrect Wi-Fi password	Double-check the Wi-Fi password and ensure it is entered correctly on the camera.
Camera is too far from the router	Move the camera closer to the router or access point to improve signal strength.
Incorrect network settings	Check the camera’s network settings in its web interface and ensure they match your network configuration.

Best Practices for Resetting

1. Confirm the Need for a Reset

Before initiating a reset, verify that the camera isn’t malfunctioning due to a software update or network connectivity issues.

2. Disconnect from the Network

Unplug the Ethernet cable or disable Wi-Fi connectivity to prevent data loss during the reset process.

3. Locate the Reset Button

The reset button is typically a small, recessed button located on the camera’s bottom or back. Use a paperclip or toothpick to press it.

4. Press and Hold the Button

Hold the reset button for the specified amount of time, usually around 10-15 seconds. Release when the camera’s LED indicators flash or turn on.

5. Wait for the Camera to Reboot

After releasing the reset button, the camera will automatically reboot and restore to factory settings. This process may take a few minutes.

6. Reconnect to the Network

Once the camera has rebooted, reconnect it to the network via Ethernet or Wi-Fi.

7. Reconfigure the Camera

Use the camera’s web interface or mobile app to reconfigure the settings, including Wi-Fi network, password, and other customizations.

8. Test the Camera’s Functionality

Verify that the reset has resolved any issues and that the camera is functioning properly.

9. Store the Reset Information

Keep a record of the default passwords, IP addresses, and other reset information in a secure location.

10. Detailed Guide to Pressing and Holding the Reset Button

The precise time and manner for pressing and holding the reset button may vary depending on the camera model. Consult the manufacturer’s user manual or online documentation for specific instructions:

Camera Model	Reset Button Instructions
Model X	Press and hold for 10 seconds, then release when the LED light turns orange.
Model Y	Press and hold for 15 seconds, then release when the LED light flashes green.
Model Z	Press and hold for 20 seconds, then release when the camera reboots.

How to Reset HJT IP Camera to Factory Settings

To reset your HJT IP camera to factory defaults, follow these steps:

Unplug the camera from the power source.
Locate the reset button on the camera. It is usually a small, recessed button.
Press and hold the reset button for about 10 seconds.
Release the reset button.
Plug the camera back into the power source.
The camera will now be reset to factory defaults.