Restringing a compound bow is a task that every archer should be able to perform. It is not a difficult process, but it does require some attention to detail. By following the steps outlined in this article, you can restring your bow safely and effectively.
Before you begin, you will need to gather a few tools. These include a bow press, a new bowstring, a bowstringer, and a pair of needle-nose pliers. You may also want to use a pair of gloves to protect your hands. The bow press is the most important tool, as it will allow you to safely remove the old bowstring and install the new one. You can purchase a bow press online or at your local archery shop.
Once you have gathered your tools, you can begin the process of restringing your bow. First, you will need to remove the old bowstring. To do this, place the bow in the bow press and slowly compress the limbs. Once the limbs are compressed, you will be able to remove the old bowstring. Be careful not to let the limbs snap back into place, as this could damage the bow. Next, you will need to install the new bowstring. To do this, place the new bowstring on the bow and loop it around the cams. Then, use the bowstringer to pull the string into place. Finally, you will need to tie the bowstring in place using a bowstring knot. There are a variety of bowstring knots that you can use, so choose one that you are comfortable with.
How to Restring a Compound Bow
Restringing a compound bow is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging your bow.
Materials you will need:
- New bowstring
- Bowstring jig
- String serving
- Bowstring wax
- Allen wrench
Instructions:
1. Remove the old bowstring. Using an Allen wrench, loosen the screws that hold the bowstring in place. Carefully remove the old bowstring from the bow.
2. Install the new bowstring. Place the new bowstring on the bowstring jig. Thread the bowstring through the cam and limb bolts. Tie a knot in the end of the bowstring and secure it with serving.
3. Adjust the bowstring length. Using an Allen wrench, adjust the screws on the cam bolts until the bowstring is the correct length. The bowstring should be tight enough to strum, but not so tight that it overloads the bow.
4. Wax the bowstring. Apply bowstring wax to the bowstring to help protect it from wear and tear.
5. Shoot the bow. Once the bowstring is installed and adjusted, shoot the bow to make sure that it is working properly.
People Also Ask About How to Restring a Compound Bow
What is the best way to learn how to restring a compound bow?
The best way to learn how to restring a compound bow is to watch a video tutorial or read a step-by-step guide.
What are the most common mistakes people make when restringing a compound bow?
The most common mistakes people make when restringing a compound bow include using the wrong size bowstring, not adjusting the bowstring length correctly, and not waxing the bowstring.
How often should I restring my compound bow?
You should restring your compound bow every 1-2 years, or more often if you shoot a lot.
