For those who love spending time on the water, the Moken 10 Canoe is a great option. It’s stable, durable, and easy to paddle. However, if you ever need to remove the motor from your Moken 10 Canoe, it can be a bit of a challenge. That’s why we’ve put together this guide on how to remove the motor from a Moken 10 Canoe.
The first step is to remove the propeller. To do this, simply unscrew the propeller nut using a wrench. Once the propeller is removed, you can then remove the motor mount. The motor mount is held in place by two bolts. Remove these bolts and the motor mount will come off.
Next, you need to disconnect the electrical wires from the motor. There are two electrical wires that connect to the motor. Simply disconnect these wires and the motor will be free. Once the motor is free, you can then remove it from the canoe. To do this, simply lift the motor up and out of the canoe.
Removing the Outboard Motor Mount
To remove the outboard motor mount, you will need the following tools:
- Socket wrench
- Box wrench
- Flathead screwdriver
- Phillips head screwdriver
- Pry bar
Here are the steps on how to remove the outboard motor mount:
- Disconnect the battery. This is a safety precaution to prevent any electrical shocks.
- Remove the bolts that hold the motor to the mount. There are typically four bolts that hold the motor to the mount. Use a socket wrench or box wrench to remove these bolts.
- Separate the motor from the mount. Once the bolts are removed, you should be able to separate the motor from the mount. Use a pry bar to gently pry the motor away from the mount if necessary.
- Clean the mounting surface. Once the motor is removed, you can clean the mounting surface of the canoe. Use a flathead screwdriver or putty knife to scrape off any old sealant or debris.
| Item | Description |
|---|---|
| Socket wrench | Used to remove the bolts that hold the motor to the mount. |
| Box wrench | Used to remove the bolts that hold the motor to the mount. |
| Flathead screwdriver | Used to scrape off any old sealant or debris from the mounting surface. |
| Phillips head screwdriver | Used to remove the screws that hold the motor cover in place. |
| Pry bar | Used to gently pry the motor away from the mount if necessary. |
- Apply new sealant to the mounting surface. Use a marine-grade sealant to apply a new bead of sealant to the mounting surface of the mount.
- Reattach the motor to the mount. Align the motor with the mounting surface and carefully lift it into place. Use a socket wrench or box wrench to tighten the bolts that hold the motor to the mount.
- Reconnect the battery. Once the motor is securely mounted, you can reconnect the battery.
Detaching the Motor Shaft
Detaching the motor shaft from the motor housing is a critical step in removing the motor from the Moke 10 canoe. Follow these detailed instructions to ensure a successful and safe procedure:
1. Gather Tools
* 10mm socket wrench
* 17mm socket wrench
* Ratchet
2. Disconnect Electrical Wires
* Locate the electrical wires connected to the motor shaft.
* Disconnect the wires carefully by unplugging the connectors.
3. Remove Motor Mount Bolts
* Identify the bolts that secure the motor mount to the canoe.
* Use the 10mm socket wrench to remove these bolts.
4. Loosen Propeller Nut
* Use the 17mm socket wrench to loosen the propeller nut.
* Do not remove the nut completely at this stage.
5. Wiggle Motor Shaft
* Grip the motor shaft firmly and gently wiggle it back and forth.
* Apply increasing force until the shaft becomes loose from the housing.
* Be patient, as this step may require some effort.
Warning:
* Avoid pulling directly on the motor shaft, as this could damage the motor housing.
* If the shaft is stuck, use a gentle rocking motion to free it up.
* Once the shaft is loose, lift the motor carefully to remove it from the canoe.
Draining the Water from the Motor
Materials You’ll Need:
- Wrench or socket set
- Funnel
- Container for the water
To drain the water from the motor, follow these steps:
1.
Disconnect the fuel line from the motor.
2.
Remove the spark plug wires from the spark plugs.
3.
Turn the motor upside down and place it on a level surface.
4.
Locate the drain plug on the bottom of the motor.
5.
Place the container under the drain plug.
6.
Use the wrench or socket set to remove the drain plug.
7.
Allow the water to drain from the motor.
8.
Once all the water has drained, replace the drain plug and tighten it securely.
9.
Reconnect the fuel line and spark plug wires.
10.
Turn the motor upright and check for leaks.
Protecting and Storing the Motor
To ensure the longevity and proper functioning of your Moken 10 Canoe motor, it’s crucial to take proper care in protecting and storing it when not in use.
Protecting the Motor
-
Rinse with Fresh Water: After use, rinse the motor thoroughly with fresh water to remove salt, sand, and debris.
-
Dry the Motor: Use a clean, dry cloth to wipe down the motor, removing any remaining moisture.
-
Apply Corrosion Inhibitor: Spray a corrosion inhibitor, such as WD-40, onto the motor’s metal components to protect them from rust and corrosion.
-
Inspect and Tighten Bolts: Check all bolts and screws and tighten any that may have loosened during use.
Storing the Motor
When storing the motor, it’s important to choose a dry, well-ventilated location to prevent moisture buildup.
-
Remove the Battery: Disconnect the battery from the motor to prevent it from draining.
-
Cover the Motor: Place a protective cover over the motor to keep it clean and dry.
Extended Storage (More than 30 Days)
For extended storage, additional steps are recommended:
| Step | Description |
|---|---|
| 1. Drain Engine Oil: Drain the engine oil from the motor and replace it with a small amount of fogging oil. | |
| 2. Fog the Engine: Remove the spark plug and spray fogging oil into the cylinder. | |
| 3. Replace the Spark Plug: Reinstall the spark plug and store the motor in a dry, well-ventilated location. |
Reassembly and Testing
Once the motor is disassembled, it’s time to reassemble it. Follow these steps carefully to ensure proper reassembly:
1. Connect the motor to the drive shaft.
Align the motor’s drive shaft with the drive shaft on the canoe. Secure the motor with the bolts provided.
2. Install the propeller.
Place the propeller onto the motor’s drive shaft. Tighten the propeller nut securely.
3. Connect the electrical wires.
Connect the positive and negative wires from the motor to the corresponding terminals on the battery. Ensure a secure connection.
4. Mount the control panel.
Mount the control panel on the canoe in a convenient location. Connect the wires from the motor to the control panel.
5. Install the battery.
Place the battery in the designated compartment on the canoe. Secure the battery with the straps or clips provided.
6. Test the motor.
Before taking the canoe out on the water, test the motor by starting it up and running it for a few minutes. Check for any unusual noises or vibrations.
7. Adjust the trim.
If the canoe is not running straight, adjust the motor’s trim by turning the trim tab until the canoe runs smoothly.
8. Lubricate the motor.
Apply a small amount of lubricant to the motor’s bearings and gearcase to ensure smooth operation.
9. Clean the motor.
After each use, clean the motor and propeller with fresh water to remove any salt or dirt buildup.
10. Store the motor properly.
When not in use, store the motor in a dry, cool location. Disconnect the battery and protect the motor from dust and moisture.
| Task | Tools |
|---|---|
| Connecting motor to drive shaft | Bolts, wrench |
| Installing propeller | Propeller nut, wrench |
| Connecting electrical wires | Screwdriver or wire crimper |
| Mounting control panel | Screws or bolts, wrench or screwdriver |
| Installing battery | Battery straps or clips |
| Adjusting trim | Trim tab |
| Lubricating motor | Lubricant, brush |
| Cleaning motor | Fresh water, sponge |
How To Take Motor Out Of Moken 10 Canoue
To remove the motor from a Moken 10 canoe, you will need the following tools:
- A wrench
- A screwdriver
- A pair of pliers
Once you have the necessary tools, follow these steps:
- Disconnect the battery from the motor.
- Remove the bolts that hold the motor to the canoe.
- Lift the motor out of the canoe.
Be sure to store the motor in a dry place when not in use.
People Also Ask
How do I remove the trolling motor from my Moken 10 canoe?
To remove the trolling motor from your Moken 10 canoe, you will need to follow the steps outlined above.
How do I replace the motor on my Moken 10 canoe?
To replace the motor on your Moken 10 canoe, you will need to follow the steps outlined above in reverse order.
What is the best way to store my Moken 10 canoe?
The best way to store your Moken 10 canoe is in a dry place away from direct sunlight.
How do I clean my Moken 10 canoe?
To clean your Moken 10 canoe, you can use a mild soap and water solution. Be sure to rinse the canoe thoroughly after cleaning.
